#!/bin/sh
#
# SPDX-License-Identifier: BSD-3-Clause
#
# Copyright (c) 2018-2025, Christer Edwards <christer.edwards@gmail.com>
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice, this
#   list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above copyright notice,
#   this list of conditions and the following disclaimer in the documentation
#   and/or other materials provided with the distribution.
#
# * Neither the name of the copyright holder nor the names of its
#   contributors may be used to endorse or promote products derived from
#   this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# Load config. This only has to be done here
# because all commands load this file
# shellcheck disable=SC1090
. ${BASTILLE_CONFIG}
	
COLOR_RED=
COLOR_GREEN=
COLOR_YELLOW=
COLOR_RESET=

bastille_root_check() {
    if [ "$(id -u)" -ne 0 ]; then
        ## permission denied
        error_notify "Bastille: Permission Denied"
        error_exit "root / sudo / doas required"
    fi
}

enable_color() {
    . /usr/local/share/bastille/colors.pre.sh
}

enable_debug() {
    # Enable debug mode.
    warn "***DEBUG MODE***"
    set -x
} 

# If "NO_COLOR" environment variable is present, or we aren't speaking to a
# tty, disable output colors.
if [ -z "${NO_COLOR}" ] && [ -t 1 ]; then
    enable_color
fi

# Notify message on error
# Do not echo blank line
error_continue() {
    error_notify "$@"
    # shellcheck disable=SC2104
    continue
}

# Notify message on error, but do not exit
error_notify() {
    echo -e "${COLOR_RED}$*${COLOR_RESET}" 1>&2
}

# Notify message on error and exit
# Echo blank line when exiting
error_exit() {
    error_notify "$@"
    echo
    exit 1
}

info() {
    echo -e "${COLOR_GREEN}$*${COLOR_RESET}"
}

warn() {
    echo -e "${COLOR_YELLOW}$*${COLOR_RESET}"
}

check_target_exists() {
    local _TARGET="${1}"
    local _jaillist="$(bastille list jails)"
    if ! echo "${_jaillist}" | grep -Eq "^${_TARGET}$"; then
        return 1
    else
        return 0
    fi
}

check_target_is_running() {
    _TARGET="${1}"
    if ! jls name | grep -Eq "^${_TARGET}$"; then
        return 1
    else
        return 0
    fi
}

check_target_is_stopped() {
    _TARGET="${1}"
    if jls name | grep -Eq "^${_TARGET}$"; then
        return 1
    else
        return 0
    fi
}

get_jail_name() {
    local _JID="${1}"
    local _jailname="$(jls -j ${_JID} name 2>/dev/null)"
    if [ -z "${_jailname}" ]; then
        return 1
    else
        echo "${_jailname}"
    fi
}

jail_autocomplete() {
    local _TARGET="${1}"
    local _jaillist="$(bastille list jails)"
    local _AUTOTARGET="$(echo "${_jaillist}" | grep -E "^${_TARGET}")"
    if [ -n "${_AUTOTARGET}" ]; then
        if [ "$(echo "${_AUTOTARGET}" | wc -l)" -eq 1 ]; then
            echo "${_AUTOTARGET}"
        else
            error_continue "Multiple jails found for ${_TARGET}:\n${_AUTOTARGET}"
            return 1
        fi
    else
        return 2
    fi
}

list_jail_priority() {
    local _jail_list="${1}"
    if [ -d "${bastille_jailsdir}" ]; then
        for _jail in ${_jail_list}; do
            # Remove boot.conf in favor of settings.conf
            if [ -f ${bastille_jailsdir}/${_jail}/boot.conf ]; then
                rm -f ${bastille_jailsdir}/${_jail}/boot.conf >/dev/null 2>&1
            fi
            local _settings_file=${bastille_jailsdir}/${_jail}/settings.conf
            # Set defaults if settings file does not exist
            if [ ! -f ${_settings_file} ]; then
                sysrc -f ${_settings_file} boot=on >/dev/null 2>&1
                sysrc -f ${_settings_file} depend="" >/dev/null 2>&1
                sysrc -f ${_settings_file} priority=99 >/dev/null 2>&1
            fi
            # Add defaults if they dont exist
            if ! grep -oq "boot=" ${_settings_file}; then
                sysrc -f ${_settings_file} boot=on >/dev/null 2>&1
            fi
            if ! grep -oq "depend=" ${_settings_file}; then
                sysrc -f ${_settings_file} depend="" >/dev/null 2>&1
            fi
            if ! grep -oq "priority=" ${_settings_file}; then
                sysrc -f ${_settings_file} priority=99 >/dev/null 2>&1
            fi
            _priority="$(sysrc -f ${_settings_file} -n priority)"
            echo "${_jail} ${_priority}"
        done
    fi
}

set_target() {
    local _TARGET=${1}
    if [ "${2}" = "reverse" ]; then
        local _order="${2}"
    else
        local _order="forward"
    fi
    JAILS=""
    TARGET=""
    if [ "${_TARGET}" = ALL ] || [ "${_TARGET}" = all ]; then
        target_all_jails
    else
        for _jail in ${_TARGET}; do
            if [ ! -d "${bastille_jailsdir}/${_TARGET}" ] && echo "${_jail}" | grep -Eq '^[0-9]+$'; then
                if get_jail_name "${_jail}" > /dev/null; then
                    _jail="$(get_jail_name ${_jail})"
                else
                    error_continue "Error: JID \"${_jail}\" not found. Is jail running?"
                fi
            elif ! check_target_exists "${_jail}"; then
                if jail_autocomplete "${_jail}" > /dev/null; then
                    _jail="$(jail_autocomplete ${_jail})"
                elif [ $? -eq 2 ]; then
                if grep -Ehoqw ${_jail} ${bastille_jailsdir}/*/tags 2>/dev/null; then
                        _jail="$(grep -Eow ${_jail} ${bastille_jailsdir}/*/tags | awk -F"/tags" '{print $1}' | sed "s#${bastille_jailsdir}/##g" | tr '\n' ' ')"
                    else
                        error_continue "Jail not found \"${_jail}\""
            fi
                else
                    echo
                    exit 1
                fi
            fi
            TARGET="${TARGET} ${_jail}"
            JAILS="${JAILS} ${_jail}"
        done
        # Exit if no jails
        if [ -z "${TARGET}" ] && [ -z "${JAILS}" ]; then
            exit 1
        fi
        if [ "${_order}" = "forward" ]; then
            TARGET="$(list_jail_priority "${TARGET}" | sort -k2 -n | awk '{print $1}')"
            JAILS="$(list_jail_priority "${TARGET}" | sort -k2 -n | awk '{print $1}')"
        elif [ "${_order}" = "reverse" ]; then
            TARGET="$(list_jail_priority "${TARGET}" | sort -k2 -nr | awk '{print $1}')"
            JAILS="$(list_jail_priority "${TARGET}" | sort -k2 -nr | awk '{print $1}')"
        fi
        export TARGET
        export JAILS
    fi
}

set_target_single() {
    local _TARGET="${1}"
    if [ "${_TARGET}" = ALL ] || [ "${_TARGET}" = all ]; then
        error_exit "[all|ALL] not supported with this command."
    elif [ "$(echo ${_TARGET} | wc -w)" -gt 1 ]; then
        error_exit "Error: Command only supports a single TARGET."
    elif [ ! -d "${bastille_jailsdir}/${_TARGET}" ] && echo "${_TARGET}" | grep -Eq '^[0-9]+$'; then
        if get_jail_name "${_TARGET}" > /dev/null; then
            _TARGET="$(get_jail_name ${_TARGET})"
        else
            error_exit "Error: JID \"${_TARGET}\" not found. Is jail running?"
        fi
    elif ! check_target_exists "${_TARGET}"; then
            if jail_autocomplete "${_TARGET}" > /dev/null; then
                _TARGET="$(jail_autocomplete ${_TARGET})"
            elif [ $? -eq 2 ]; then
                error_exit "Jail not found \"${_TARGET}\""
            else
                echo
                exit 1
            fi
    fi
    # Exit if no jails
    if [ -z "${_TARGET}" ] && [ -z "${_JAILS}" ]; then
        exit 1
    fi
    TARGET="${_TARGET}"
    JAILS="${_TARGET}"
    export TARGET
    export JAILS
}

# This function is run immediately
set_bastille_mountpoints() {

    if checkyesno bastille_zfs_enable; then

        # We have to do this if ALTROOT is enabled/present
        local _altroot="$(zpool get -Ho value altroot ${bastille_zfs_zpool})"

        # Set mountpoints to *bastille*dir*
        # shellcheck disable=SC2034
        bastille_prefix_mountpoint="${bastille_prefix}"
        # shellcheck disable=SC2034
        bastille_backupsdir_mountpoint="${bastille_backupsdir}"
        # shellcheck disable=SC2034
        bastille_cachedir_mountpoint="${bastille_cachedir}"
        # shellcheck disable=SC2034
        bastille_jailsdir_mountpoint="${bastille_jailsdir}"
        # shellcheck disable=SC2034
        bastille_releasesdir_mountpoint="${bastille_releasesdir}"
        # shellcheck disable=SC2034
        bastille_templatesdir_mountpoint="${bastille_templatesdir}"
        # shellcheck disable=SC2034
        bastille_logsdir_mountpoint="${bastille_logsdir}"

        # Add _altroot to *dir* if set
        if [ "${_altroot}" != "-" ]; then  
            # Set *dir* to include ALTROOT
            bastille_prefix="${_altroot}${bastille_prefix}"
            bastille_backupsdir="${_altroot}${bastille_backupsdir}"
            bastille_cachedir="${_altroot}${bastille_cachedir}"
            bastille_jailsdir="${_altroot}${bastille_jailsdir}"
            bastille_releasesdir="${_altroot}${bastille_releasesdir}"
            bastille_templatesdir="${_altroot}${bastille_templatesdir}"
            bastille_logsdir="${_altroot}${bastille_logsdir}" 
        fi
    fi
}

target_all_jails() {
    local _JAILS="$(bastille list jails)"
    JAILS=""
    for _jail in ${_JAILS}; do
        if [ -d "${bastille_jailsdir}/${_jail}" ]; then
            JAILS="${JAILS} ${_jail}"
        fi
    done
    # Exit if no jails
    if [ -z "${JAILS}" ]; then
        exit 1
    fi
    if [ "${_order}" = "forward" ]; then
        JAILS="$(list_jail_priority "${JAILS}" | sort -k2 -n | awk '{print $1}')"
    elif [ "${_order}" = "reverse" ]; then
        JAILS="$(list_jail_priority "${JAILS}" | sort -k2 -nr | awk '{print $1}')"
    fi
    export JAILS
}

update_fstab() {
    local _oldname="${1}"
    local _newname="${2}"
    local _fstab="${bastille_jailsdir}/${_newname}/fstab"
    if [ -f "${_fstab}" ]; then
        sed -i '' "s|${bastille_jailsdir}/${_oldname}/root/|${bastille_jailsdir}/${_newname}/root/|" "${_fstab}"
    else
        error_notify "Error: Failed to update fstab: ${_newmane}"
    fi
}

generate_static_mac() {
    local jail_name="${1}"
    local external_interface="${2}"
    local external_interface_mac="$(ifconfig ${external_interface} | grep ether | awk '{print $2}')"
    # Use FreeBSD vendor MAC prefix (58:9c:fc) for jail MAC prefix
    local macaddr_prefix="58:9c:fc"
    # Use hash of interface+jailname for jail MAC suffix
    local macaddr_suffix="$(echo -n "${external_interface_mac}${jail_name}" | sed 's#:##g' | sha256 | cut -b -5 | sed 's/\([0-9a-fA-F][0-9a-fA-F]\)\([0-9a-fA-F][0-9a-fA-F]\)\([0-9a-fA-F]\)/\1:\2:\3/')"
    if [ -z "${macaddr_prefix}" ] || [ -z "${macaddr_suffix}" ]; then
        error_notify "Failed to generate MAC address."
    fi
    macaddr="${macaddr_prefix}:${macaddr_suffix}"
    export macaddr
}

generate_vnet_jail_netblock() {

    local jail_name="${1}"
    local use_unique_bridge="${2}"
    local external_interface="${3}"
    local static_mac="${4}"

    if [ "${bastille_network_vnet_type}" = "if_bridge" ]; then
        if [ -n "${use_unique_bridge}" ]; then
            if [ "$(echo -n "e0a_${jail_name}" | awk '{print length}')" -lt 16 ]; then
                local host_epair=e0a_${jail_name}
                local jail_epair=e0b_${jail_name}
            else
            name_prefix="$(echo ${jail_name} | cut -c1-7)"
            name_suffix="$(echo ${jail_name} | rev | cut -c1-2 | rev)"
            local host_epair="e0a_${name_prefix}xx${name_suffix}"
                local jail_epair="e0b_${name_prefix}xx${name_suffix}"
            fi
        else
            if [ "$(echo -n "e0a_${jail_name}" | awk '{print length}')" -lt 16 ]; then
                local host_epair=e0a_${jail_name}
                local jail_epair=e0b_${jail_name}
            local jib_epair=${jail_name}
            else
            name_prefix="$(echo ${jail_name} | cut -c1-7)"
            name_suffix="$(echo ${jail_name} | rev | cut -c1-2 | rev)"
            local host_epair="e0a_${name_prefix}xx${name_suffix}"
                local jail_epair="e0b_${name_prefix}xx${name_suffix}"
                local jib_epair="${name_prefix}xx${name_suffix}"
        fi
        fi
    elif [ "${bastille_network_vnet_type}" = "netgraph" ]; then
        if [ "$(echo -n "ng0_${jail_name}" | awk '{print length}')" -lt 16 ]; then
            local ng_if=ng0_${jail_name}
        local jng_if=${jail_name}
        else
        name_prefix="$(echo ${jail_name} | cut -c1-7)"
        name_suffix="$(echo ${jail_name} | rev | cut -c1-2 | rev)"
        local ng_if="ng0_${name_prefix}xx${name_suffix}"
            local jng_if="${name_prefix}xx${name_suffix}"
        fi
    fi

    ## If BRIDGE is enabled, generate bridge config, else generate VNET config
    if [ -n "${use_unique_bridge}" ]; then
        if [ -n "${static_mac}" ]; then
            ## Generate bridged VNET config with static MAC address
            generate_static_mac "${jail_name}" "${external_interface}"
            cat <<-EOF
  vnet;
  vnet.interface = ${jail_epair};
  exec.prestart += "epair0=\\\$(ifconfig epair create) && ifconfig \\\${epair0} up name ${host_epair} && ifconfig \\\${epair0%a}b up name ${jail_epair}";
  exec.prestart += "ifconfig ${external_interface} addm ${host_epair}";
  exec.prestart += "ifconfig ${host_epair} ether ${macaddr}a";
  exec.prestart += "ifconfig ${jail_epair} ether ${macaddr}b";
  exec.prestart += "ifconfig ${host_epair} description \"vnet0 host interface for Bastille jail ${jail_name}\"";
  exec.poststop += "ifconfig ${host_epair} destroy";
EOF
        else
            ## Generate bridged VNET config without static MAC address
            cat <<-EOF
  vnet;
  vnet.interface = ${jail_epair};
  exec.prestart += "epair0=\\\$(ifconfig epair create) && ifconfig \\\${epair0} up name ${host_epair} && ifconfig \\\${epair0%a}b up name ${jail_epair}";
  exec.prestart += "ifconfig ${external_interface} addm ${host_epair}";
  exec.prestart += "ifconfig ${host_epair} description \"vnet0 host interface for Bastille jail ${jail_name}\"";
  exec.poststop += "ifconfig ${host_epair} destroy";
EOF
        fi
    else
        if [ "${bastille_network_vnet_type}" = "if_bridge" ]; then
            if [ -n "${static_mac}" ]; then
                ## Generate VNET config with static MAC address
                generate_static_mac "${jail_name}" "${external_interface}"
                cat <<-EOF
  vnet;
  vnet.interface = ${jail_epair};
  exec.prestart += "jib addm ${jib_epair} ${external_interface}";
  exec.prestart += "ifconfig ${host_epair} ether ${macaddr}a";
  exec.prestart += "ifconfig ${jail_epair} ether ${macaddr}b";
  exec.prestart += "ifconfig ${host_epair} description \"vnet0 host interface for Bastille jail ${jail_name}\"";
  exec.poststop += "ifconfig ${host_epair} destroy";
EOF
            else
                ## Generate VNET config without static MAC address
                cat <<-EOF
  vnet;
  vnet.interface = ${jail_epair};
  exec.prestart += "jib addm ${jib_epair} ${external_interface}";
  exec.prestart += "ifconfig ${host_epair} description \"vnet0 host interface for Bastille jail ${jail_name}\"";
  exec.poststop += "ifconfig ${host_epair} destroy";
EOF
            fi
        elif [ "${bastille_network_vnet_type}" = "netgraph" ]; then
            if [ -n "${static_mac}" ]; then
                ## Generate VNET config with static MAC address
                generate_static_mac "${jail_name}" "${external_interface}"
                cat <<-EOF
  vnet;
  vnet.interface = ${ng_if};
  exec.prestart += "jng bridge ${jng_if} ${external_interface}";
  exec.prestart += "ifconfig ${ng_if} ether ${macaddr}b";
  exec.poststop += "jng shutdown ${jng_if}";
EOF
            else
                ## Generate VNET config without static MAC address
                cat <<-EOF
  vnet;
  vnet.interface = ${ng_if};
  exec.prestart += "jng bridge ${jng_if} ${external_interface}";
  exec.poststop += "jng shutdown ${jng_if}";
EOF
            fi
        fi
    fi
}

validate_netconf() {

    # Add default 'bastille_network_vnet_type' on old config file
    # This is so we don't have to indtroduce a 'breaking change' statement
    if ! grep -oq "bastille_network_vnet_type=" "${BASTILLE_CONFIG}"; then
        sed -i '' "s|## Networking|&\nbastille_network_vnet_type=\"if_bridge\"                                ## default: \"if_bridge\"|" ${BASTILLE_CONFIG}
        # shellcheck disable=SC1090
        . ${BASTILLE_CONFIG}
    fi

    # Validate that 'bastille_network_vnet_type' has been set
    if [ -n "${bastille_network_loopback}" ] && [ -n "${bastille_network_shared}" ]; then
        error_exit "[ERROR]: 'bastille_network_loopback' and 'bastille_network_shared' cannot both be set."
    fi
    if [ "${bastille_network_vnet_type}" != "if_bridge" ] && [ "${bastille_network_vnet_type}" != "netgraph" ]; then
        error_exit "[ERROR]: 'bastille_network_vnet_type' not set properly: ${bastille_network_vnet_type}"
    fi
}

checkyesno() {
    ## copied from /etc/rc.subr -- cedwards (20231125)
    ## issue #368 (lowercase values should be parsed)
    ## now used for all bastille_zfs_enable=YES|NO tests
    ## example: if checkyesno bastille_zfs_enable; then ...
    ## returns 0 for enabled; returns 1 for disabled
    eval _value=\$${1}
    case $_value in
    [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
        return 0
        ;;
    [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
        return 1
        ;;
    *)
        warn "\$${1} is not set properly - see rc.conf(5)."
        return 1
        ;;
    esac
}

update_jail_syntax_v1() {

    local jail="${1}"
    local jail_config="${bastille_jailsdir}/${jail}/jail.conf"
    local jail_rc_config="${bastille_jailsdir}/${jail}/root/etc/rc.conf"

    # Only apply if old syntax is found
    if grep -Eoq "exec.prestart.*ifconfig epair[0-9]+ create.*" "${jail_config}"; then

        warn "\n[WARNING]\n"
        warn "Updating jail.conf file..."
        warn "Please review your jail.conf file after completion."
        warm "VNET jails created without -M will be assigned a new MAC address."

        if [ "$(echo -n "e0a_${jail}" | awk '{print length}')" -lt 16 ]; then
            local new_host_epair=e0a_${jail}
            local new_jail_epair=e0b_${jail}
        else
        name_prefix="$(echo ${jail} | cut -c1-7)"
        name_suffix="$(echo ${jail} | rev | cut -c1-2 | rev)"
        local new_host_epair="e0a_${name_prefix}xx${name_suffix}"
            local new_jail_epair="e0b_${name_prefix}xx${name_suffix}"
        fi

        # Delete unneeded lines
        sed -i '' "/.*exec.prestart.*ifconfig.*up name.*;/d" "${jail_config}"
        sed -i '' "/.*exec.poststop.*ifconfig.*deletem.*;/d" "${jail_config}"

        # Change jail.conf
        sed -i '' "s|.*vnet.interface =.*|  vnet.interface = ${new_jail_epair};|g" "${jail_config}"
        sed -i '' "s|.*ifconfig epair.*create.*|  exec.prestart += \"epair0=\\\\\$(ifconfig epair create) \&\& ifconfig \\\\\${epair0} up name ${new_host_epair} \&\& ifconfig \\\\\${epair0%a}b up name ${new_jail_epair}\";|g" "${jail_config}"
        sed -i '' "s|addm.*|addm ${new_host_epair}\";|g" "${jail_config}"
        sed -i '' "/ether.*:.*:.*:.*:.*:.*a/ s|ifconfig.*ether|ifconfig ${new_host_epair} ether|g" "${jail_config}"
        sed -i '' "/ether.*:.*:.*:.*:.*:.*b/ s|ifconfig.*ether|ifconfig ${new_jail_epair} ether|g" "${jail_config}"
        sed -i '' "s|ifconfig.*description|ifconfig ${new_host_epair} description|g" "${jail_config}"
        sed -i '' "s|ifconfig.*destroy|ifconfig ${new_host_epair} destroy|g" "${jail_config}"

        # Change rc.conf
        sed -i '' "/ifconfig_.*_name.*vnet.*/ s|ifconfig_.*_name|ifconfig_${new_jail_epair}_name|g" "${jail_rc_config}"

    elif grep -Eoq "exec.poststop.*jib destroy.*" "${jail_config}"; then

        warn "\n[WARNING]\n"
        warn "Updating jail.conf file..."
        warn "Please review your jail.conf file after completion."
        warm "VNET jails created without -M will be assigned a new MAC address."

        local external_interface="$(grep -Eo "jib addm.*" "${jail_config}" | awk '{print $4}')"

        if [ "$(echo -n "e0a_${jail}" | awk '{print length}')" -lt 16 ]; then
            local new_host_epair=e0a_${jail}
            local new_jail_epair=e0b_${jail}
            local jib_epair="${jail}"
        else
        name_prefix="$(echo ${jail} | cut -c1-7)"
        name_suffix="$(echo ${jail} | rev | cut -c1-2 | rev)"
        local new_host_epair="e0a_${name_prefix}xx${name_suffix}"
            local new_jail_epair="e0b_${name_prefix}xx${name_suffix}"
            local jib_epair="${name_prefix}xx${name_suffix}"
        fi

        # Change jail.conf
        sed -i '' "s|.*vnet.interface =.*|  vnet.interface = ${new_jail_epair};|g" "${jail_config}"
        sed -i '' "s|jib addm.*|jib addm ${jib_epair} ${external_interface}|g" "${jail_config}"
        sed -i '' "/ether.*:.*:.*:.*:.*:.*a/ s|ifconfig.*ether|ifconfig ${new_host_epair} ether|g" "${jail_config}"
        sed -i '' "/ether.*:.*:.*:.*:.*:.*b/ s|ifconfig.*ether|ifconfig ${new_jail_epair} ether|g" "${jail_config}"
        sed -i '' "s|ifconfig.*description|ifconfig ${new_host_epair} description|g" "${jail_config}"
        sed -i '' "s|jib destroy.*|ifconfig ${new_host_epair} destroy\";|g" "${jail_config}"

        # Change rc.conf
        sed -i '' "/ifconfig_.*_name.*vnet.*/ s|ifconfig_.*_name|ifconfig_${new_jail_epair}_name|g" "${jail_rc_config}"

    fi
}

set_bastille_mountpoints